168 mm diameter Cylinder Swing Turnstile Gate Stainless Steel 304 Barrier Arm with DC Brushless motor
PRODUCT OVERVIEW
This Motorized Swing Gate is designed for managing pedestrian flows at entrance points of public buildings, banks,
administrative offices, retail outlets, railway terminals, airports, etc., meeting the highest requirements for design and
comfort. Gates can be placed alongside other turnstiles or as standalone devices.
PRODUCT ADVANTAGE
- Bi-directional;
- High quality at a cost effective price;
- Integration with any type of access control and ID systems;
- Low power consumption;
- Whisper quiet, low noise operation;
- Possibility of gate opener customization;
- Wide range of accessories;
- Complete supply set as a standard;
- Fail safe.
MAIN FUNCTION AND FEATURES
1. Stainless steel housing, rain-proof laser opening, novel and beautiful.
2. LINIX (the best micro-motor brand in China) brush-less DC motor is used and the surface is electroplated.
3. Length of arm: 500mm to 800mm.
4. Fault detection and alarm functions, easy to use and maintenance.
5. The running status can be programmed and controlled with the built-in keyboard on the main board.
6. Mechanical anti-pinch function. If the gate meets resistance in the reset process, motors will stop working
automatically within the prescribed time and reset again after the default delay (till fully reset).
7.Anti-breakthrough function. The gate is locked automatically until opening signal received.
8. Synchronization functions (for dual gate equipment).
9.Automatic reset function. Should the user fail to pass within the prescribed time (default time is 5 seconds),
the system will cancel the authority of the current user automatically.
10. Gate can be set as normally open or normally closed.
11. Can be used with variety of card readers: IC / ID card readers, bar codes, fingerprints, etc. (Via dry contact signal)
12. Direction can be set as unidirectional or bidirectional.
13. The device can be connected to management computer to realize remote control and management.
14. LED direction indicator (optional)
15. Gate auto opens when power off and auto close when power on, complying with fire safety requirements.
16. Support infrared photocell for anti-pinch and reset function.
TECHNICIAN SPECIFICATIONS
| Description | Parameter |
| Cabinet material | 304 stainless steel |
| Arm material | 304 stainless steel/ Acrylic |
| Dimension | Case diameter:168mm |
| Power supply | AC 220V/110V±10% |
| Motor voltage | DC24V (Brush-less motor) |
| Access device input | Dry contact |
| Optimal flow rate | 30 to 35 person/minute |
| Gate swing angle | 90 deg per side |
| Gate opening/closing speed | 1s |
| Reset time when power on | 3s |
| Arm material | Transparent acrylic/ SS304 |
| Default arm length | 530mm |
| Arm max. bearing capacity | 30KG |
| Working environment | Indoor/outdoor with shelter |
| Working temperature | -15°C~80°C |
| Relative humility | ≤95%, Non condensation |
| Communication interface | RS485 standard(distance ≤ 1200m) |
PRODUCT DIMENSION (Accept customization)
Product Tags:
|
|
168mm Diameter Cylinder Swing Turnstile Gate Stainless Steel 304 With DC Brushless Motor Images
|
